Altana LCM III Uživatelský manuál stáhnout pdf (Strana 33)

Standard Operations

6. Insert the sample cuvette/cell.

For the use of 11 mm round vials the measurement starts

automatically.

For the use of square cuvettes/sample cells in the cell

compartment #2, press Measure to start the measurement.

7. The result of the color calculation is displayed.

Note: The control bar displayed on the right of the displayed result

shows the relationship of the measurement result to the measuring

range.

8. For the next measurement, remove the cuvette/sample cell and

insert the next sample cuvette/cell or press Measure to

measure the same sample again.

5.5.1.1 Touch-sensitive areas on the measurement window

On the screen are touch-sensitive areas where the user has

immediate access to special software options.

Figure 5 Touch-sensitive areas on the measurement window

1 Open Operator ID to change or add operator ID

(see section 5.2.1 on page 16 )

4 Change the displayed color scale to the next color

system which is selected in the Operator ID color

scale list for display. (see section 5.5.1.3 on page

33)

2 Open Sample ID to change or add sample ID

(see section 5.2.2 on page 17)

5 Change Date & Time (see section 5.2.3 on page

18)

3 Open Select Color Scale and select scale for

display (see section 5.5.1.3 on page 33)

6 Open Power Management to indicate the charge

status of the battery in %. (see section 5.2.5 on

page 19)

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 233 234

Žádné komentáře

Altana LCM III Uživatelský manuál Strana 33